• Fits 1952-1954 Ford cars
• Includes mounting hardware and rubber
• Heavy gauge steel in the original design
• Comes in paintable red primer

The post Flush Mount Steel Fender Skirts For 1952-1954 Ford & Mercury appeared first on GoodSpeed USA.

• Fits all 1969-1994 Chevrolet car models except  (excl. Corvette, Sprint, Spectrum, 86-88 Nova, 69 Corvair)
• Fits most aftermarket steering columns with GM 36 count splines including most Flaming River and IDidit columns
• Will not fit telescoptic columns
• Will work on tilt columns
• Two different 6 hole steering wheel patterns:

70mm PCD & 74mm
PCD

The post 6 Hole (70mm or 74mm) Steering Wheel Polished Hub Adapter Ididit Chevy appeared first on GoodSpeed USA.

• Licensed GM Restoration piece
• Includes mounting hardware

The post Pair Chrome Quarter Panel Deer Emblems For 1964 Chevrolet Impala appeared first on GoodSpeed USA.

• Fits all Volkswagen models from 1960-1973 except Bus and Pickup
• 5 & 6 hole steering wheel patterns:

70mm (2.75″) PCD

• Will NOT work with Nardi or Personal steering wheels
• Black finish
• Includes adapter hardware and horn button wire

The post Black 5/6 Hole Steering Wheel Hub Adapter For 1960-1973 Volkswagen appeared first on GoodSpeed USA.

• Designed for hot rods & street rods
• Rubber bushings in each end
• Measurements from eye to eye are 9 1/4″ collapsed & 14 1/4″ extended
• Accepts 7/16″ upper & 5/8″ lower bolts or studs
• Cover protects shaft from road debris
• Topped with a high quality chrome finish
• Sold as a pair

The post Pair Chrome Hydraulic Shock Absorbers For Street / Hot Rod – Pete & Jakes appeared first on GoodSpeed USA.

Gas
Shock Absorbers
• Designed for hot rods & street rods
• Rubber bushings in each end
• Measurements from eye to eye are 7 7/8″ collapsed & 11 1/4″ extended
• Accepts 7/16″ upper & 5/8″ lower bolts or studs (These shocks come with 7/16″ ID upper sleeves for use with most weld on shock mounts. To accommodate popular “F-1″ style shock mounts the sleeve can easily be pressed out to change the ID to 5/8”)
• Cover protects shaft from road debris
• Sold as a pair

The post Pair Short Covered Chrome Gas Filled Shock Absorbers For Street / Hot Rod appeared first on GoodSpeed USA.

• Fits 1981-1993 Dodge Ramcharger

–
This weatherstrip seals the glass in the opening of the liftgate

• Quality reproduction manufactured by Precision Replacement Parts

Note: “This item is designed to be installed during glass replacement. Precision recommends contacting a professional auto glass technician for installation.”

The post Rear Window Glass Weatherstrip Seal For 1981-1993 Dodge Ramcharger 2 Door appeared first on GoodSpeed USA.

• Fits 1964-1973 Ford Mustang

(will not fit 1970 models with California emissions)

• Made out of billet aluminum and topped with a black finish
• Includes security cable to deter theft
• Chrome button head screw look outlining the pony emblem
• Puts a perfect finishing touch on your Resto-Mod

The post Black Billet Twist On Style Gas Cap Tri-Bar Pony Emblem 1964-1973 Ford Mustang appeared first on GoodSpeed USA.

• Fits 1964-66 Ford Mustang
• Includes LH front fender emblem (drivers side)
• Includes mounting clips
• Made out of metal

The post Tri Bar Running Pony Front LH Fender Emblem For 1964-66 Ford Mustang Left Hand appeared first on GoodSpeed USA.

• Measures 13″ long x 3-1/2″ wide x 4-1/2″ tall
• Mounting holes measure 1-3/4″ center to center
• Will mount on any flat surface
• Requires drilling for installation
• Made out of heavy duty die cast metal
• Mounting pad and hardware included
• Chrome finish

The post 13″ Chrome Bull Horn Hood Ornament Flat Base For Peterbilt Kenworth Freightliner appeared first on GoodSpeed USA.

• Fits Diode Dynamics SS3 pods only
• Driving yellow replacement lens for SS3 LED pod
• Made out of durable polycarbonate, with preinstalled o-ring seal
• Advanced TIR optics provide high efficiency and focus

The post Diode Dynamics Replacement Yellow Driving Lens For SS3 Pods appeared first on GoodSpeed USA.

• Features Amber Backlight that can function as a running light
• Modern TIR optics provide highest intensity on the market
• Durable powdercoated aluminum construction
• Integrated Deutsch-style connector

-Two Mounting Brackets and Hardware

• Engineered and Assembled in USA

Specs:
LENS COLOR/OPTICS :  Yellow Fog PRO
PEAK BEAM INTENSITY : 10,900 cd
ILLUMINANCE : 109 lux
MEASURED OUTPUT LUMENS : 2700 lm
RAW OUTPUT LUMENS : 5220 lm
OUTPUT COLOR : 3000K Yellow

The post Diode Dynamics SS3 Stage Series 3″ SAE/DOT Yellow PRO Fog LED Pods (pair) W/ ABL appeared first on GoodSpeed USA.

• Fits Diode Dynamics SS3 pods only
• SAE fog clear replacement lens for SS3 LED pod
• Made out of durable polycarbonate, with preinstalled o-ring seal
• Advanced TIR optics provide high efficiency and focus

The post Diode Dynamics Replacement Clear Fog Lens For SS3 Pods appeared first on GoodSpeed USA.

Economy Traffic Light Viewer with Suction Cup Base

-For use with Fulton type visors so the driver can see the stop lights
-2 1/8″ wide and 2 1/2″ tall
-Clear Plastic Upper with a rubber suction cup base
-Universal as long as there is something smooth to mount it to.  The base does swivel so it could be mounted to the windshield, but the windshield will have to be pretty much vertical with no slant.
-We also sell a deluxe version of this Traffic Viewer.  The part number of the deluxe model that is metal with a magnetic base is A5171. It can be found in our store under the “New Hot Rod Parts” Category

The post Universal Plastic Traffic Light Viewer w/ Suction Cup Base appeared first on GoodSpeed USA.

]]> 42823 https://goodspeedusa.com/product/metal-vintage-vacuum-wolf-whistle-w-hose-hardware-for-cars-trucks/?utm_source=rss&utm_medium=rss&utm_campaign=metal-vintage-vacuum-wolf-whistle-w-hose-hardware-for-cars-trucks Thu, 12 Dec 2024 00:06:04 +0000 https://goodspeedusa.com/product/metal-vintage-vacuum-wolf-whistle-w-hose-hardware-for-cars-trucks/ Metal Vintage Vacuum Wolf Whistle w/ Hose & Hardware For Cars & Trucks

The post Metal Vintage Vacuum Wolf Whistle w/ Hose & Hardware For Cars & Trucks appeared first on GoodSpeed USA.

]]> Vacuum Wolf Whistle
• Works on cars & trucks with a vacuum source
• Made out of die-cast metal
• Classic original wolf sound
• Strong vacuum hose, hardware and instructions are included

The post Metal Vintage Vacuum Wolf Whistle w/ Hose & Hardware For Cars & Trucks appeared first on GoodSpeed USA.

]]> 42753 https://goodspeedusa.com/product/center-bolt-valve-covers-for-sbc-305-5-0l-350-5-7l-black-ball-milled/?utm_source=rss&utm_medium=rss&utm_campaign=center-bolt-valve-covers-for-sbc-305-5-0l-350-5-7l-black-ball-milled Thu, 12 Dec 2024 00:05:45 +0000 https://goodspeedusa.com/product/center-bolt-valve-covers-for-sbc-305-5-0l-350-5-7l-black-ball-milled/ Center Bolt Valve Covers For SBC 305 5.0L & 350 5.7L - Black Ball Milled

The post Center Bolt Valve Covers For SBC 305 5.0L & 350 5.7L – Black Ball Milled appeared first on GoodSpeed USA.

]]> Black Ball Milled Style Valve Covers
• Fits most 1987+ center bolt style small block Chevy
• May not work with LT1 engines
• Includes baffles and bolts
• Made out of aluminum
• Smooth black finish with ball milled top
• Short style covers 2 9/16″ in height

The post Center Bolt Valve Covers For SBC 305 5.0L & 350 5.7L – Black Ball Milled appeared first on GoodSpeed USA.

]]> 42746 https://goodspeedusa.com/product/deck-trunk-lid-or-nose-header-panel-emblem-for-1968-1969-camaro-by-chevrolet/?utm_source=rss&utm_medium=rss&utm_campaign=deck-trunk-lid-or-nose-header-panel-emblem-for-1968-1969-camaro-by-chevrolet Thu, 12 Dec 2024 00:04:39 +0000 https://goodspeedusa.com/product/deck-trunk-lid-or-nose-header-panel-emblem-for-1968-1969-camaro-by-chevrolet/ Deck Trunk Lid or Nose Header Panel Emblem for 1968-1969 Camaro by Chevrolet

The post Deck Trunk Lid or Nose Header Panel Emblem for 1968-1969 Camaro by Chevrolet appeared first on GoodSpeed USA.

]]> “Camaro by Chevrolet” Emblem
• Fits 1968-69 Camaro truck lid or header panel emblem locations

– Quality chrome diecast with bonded black inlay

• Accurate stud placement
• Sold individually, see our store for more quantity options
• Officially Licensed GM Restoration Parts

The post Deck Trunk Lid or Nose Header Panel Emblem for 1968-1969 Camaro by Chevrolet appeared first on GoodSpeed USA.

]]> 42735 https://goodspeedusa.com/product/fuel-tank-filler-pipe-grommet-seal-for-1981-1997-ford-mustang/?utm_source=rss&utm_medium=rss&utm_campaign=fuel-tank-filler-pipe-grommet-seal-for-1981-1997-ford-mustang Thu, 12 Dec 2024 00:03:41 +0000 https://goodspeedusa.com/product/fuel-tank-filler-pipe-grommet-seal-for-1981-1997-ford-mustang/ Fuel Tank Filler Pipe Grommet Seal For 1981-1997 Ford Mustang

The post Fuel Tank Filler Pipe Grommet Seal For 1981-1997 Ford Mustang appeared first on GoodSpeed USA.

]]> Fuel Tank Filler Pipe Grommet Seal
• Fits 1981-1997 Ford Mustang

(from 4/81)

• Attaches fuel tank filler pipe to the fuel tank
• Made to OE specifications

The post Fuel Tank Filler Pipe Grommet Seal For 1981-1997 Ford Mustang appeared first on GoodSpeed USA.

]]> 42730 https://goodspeedusa.com/product/green-18-led-clear-lens-watermelon-marker-turn-signal-clearance-light-w-base/?utm_source=rss&utm_medium=rss&utm_campaign=green-18-led-clear-lens-watermelon-marker-turn-signal-clearance-light-w-base Thu, 12 Dec 2024 00:03:05 +0000 https://goodspeedusa.com/product/green-18-led-clear-lens-watermelon-marker-turn-signal-clearance-light-w-base/ Green 18 LED / Clear Lens Watermelon Marker Turn Signal Clearance Light w/ Base

The post Green 18 LED / Clear Lens Watermelon Marker Turn Signal Clearance Light w/ Base appeared first on GoodSpeed USA.

]]> Classic Watermelon Surface Mount LED Turn/Marker Light
• 18 high power green LED’s with clear lens
• Dual function (high/low 3 wires)
• Measures 3-7/16″ (DIA)  x 2-5/8″ (H)
• Easy surface mount design
• 12″ lead wire with (3) .180 bullet plugs
• Sold individually

The post Green 18 LED / Clear Lens Watermelon Marker Turn Signal Clearance Light w/ Base appeared first on GoodSpeed USA.

]]> 42725 https://goodspeedusa.com/product/set-3-chrome-switch-covers-for-kenworth-t680-t880-w990/?utm_source=rss&utm_medium=rss&utm_campaign=set-3-chrome-switch-covers-for-kenworth-t680-t880-w990 Thu, 12 Dec 2024 00:02:28 +0000 https://goodspeedusa.com/product/set-3-chrome-switch-covers-for-kenworth-t680-t880-w990/ (Set/3) Chrome Switch Covers For Kenworth T680, T880 & W990

The post (Set/3) Chrome Switch Covers For Kenworth T680, T880 & W990 appeared first on GoodSpeed USA.

]]> (Set/3) Chrome Switch Covers
• Fits Kenworth T680, T880 & W990
• Made out of high quality plastic
• Beautiful high quality chrome plated finish with triple chrome plating process
• Double sided tape on back for easy installation
• Sold as a set of 3

The post (Set/3) Chrome Switch Covers For Kenworth T680, T880 & W990 appeared first on GoodSpeed USA.

]]> 42718